64 11 Housing, heater/air conditioner
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - HOUSING, HEATER/AIR CONDITIONER
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bulkhead adapter | E85, E86, E89 | 1.0 ± 0.3 Nm | ||
| 2AZ Blower for heater/air conditioner | E85, E86 | 1.5 ± 0.3 Nm | ||
| 3AZ Controller for heating and air conditioning system blower | E84, E85, E86, E89 | 1.0 ± 0.3 Nm | ||
| 4AZ Air conditioner to bulkhead | E60, E61, E63, E64, E83, E81, E82, E87, E88, E90, E91, E92, E93 | 6 Nm | ||
| E70, E71, E72 | 6.5 Nm | |||
| 5AZ Cooler box to luggage compartment partition wall | E65, E66, E67 | 4.5 Nm | ||
| 6AZ Air conditioner to support tube | E81, E82, E84, E87, E88, E90, E91, E92, E93 | 9 Nm | ||
| 7AZ Mounting, positive/negative lead, to electric auxiliary heater | E83 | 8.8 Nm |
TIGHTENING TORQUE SPECIFICATION - HOUSING, HEATER/AIR CONDITIONER
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Bulkhead adapter | E85, E86, E89 | 1.0 ± 0.3 Nm | ||
| 2AZ Fan for heater/air conditioner | E85, E86 | 1.5 ± 0.3 Nm | ||
| 3AZ Controller for heater - A/C system fan | E84, E85, E86, E89 | 1.0 ± 0.3 Nm | ||
| 4AZ Air conditioner to bulkhead | E60, E61, E63, E64, E83, E81, E82, E87, E88, E90, E91, E92, E93 | 6 Nm | ||
| E70, E71, E72 | 6.5 Nm | |||
| 5AZ Cooler box to luggage compartment partition wall | E65, E66, E67 | 4.5 Nm | ||
| 6AZ Air conditioner to support tube | E81, E82, E84, E87, E88, E90, E91, E92, E93 | 9 Nm | ||
| 7AZ Mounting, positive/negative lead, to electric auxiliary heater | E83 | 8.8 Nm |