41 35 Side walls
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - SIDE WALLS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Front side panel to body | E63/E64 | M6x22 10.9 | 12 Nm | |
| E83 | ST6.3x14 | 7 Nm | ||
| E60/E61/E81/E82/E85/E86/E87/E88/E90/E91/E92/E93/E84 | M6 | 7.6 Nm | ||
| E89 | M6 | 8 Nm | ||
| 2AZ Front side panel to body | E63/E64 | M6 nut | 5 Nm | |
| E60/E61 | M6 nut | 7.6 Nm | ||
| E89 | M6 nut | 8 Nm | ||
| 3AZ Front side panel to body | E60/E61 | Sheet metal screw ST4.8x19 | 7.6 Nm | |
| 4AZ Combination holder, side panel, front, to body | E81/E82/E87/E88/E92 | M6 | 7.6 Nm | |
| 5AZ Rear side panel to body | E85/E86/E89 | M6 | 7.6 Nm | |
| 6AZ Side panel, front, to module carrier/bumper carrier | E70/E71/E72 | M6x16 | Replace bolts | 4 Nm |
| 7AZ Front side panel to body Area, A-pillar |
E70/E71/E72 | M6x16 | Replace bolts | 8 Nm |
| 8AZ Front side panel to body Area, sill |
E70/E71/E72 | Sheet metal screw ST4.8x19 | Replace bolts | 2.5 Nm |
| 9AZ Front side panel to body | E70/E71/E72 | M5x20 | Replace bolts | 5 Nm |
| 10AZ Module carrier, top, to Carrier support | E70/E71/E72 | M6x26 | Replace bolts | 8 Nm |
| 11AZ Module carrier, bottom, to engine support | E70/E71/E72 | M6 nut | 7 Nm |