33 17 005 Replacing rubber mount for rear differential mounting at rear (M3)

Necessary preliminary tasks 

• Remove REAR DIFFERENTIAL 

Withdraw PUR mount with special tools 33 0 101, 33 0 102, 33 0 105, 33 0 106 from rear axle carrier (1).

Fig 1: Removing PUR Mount Using Special Tools From Rear Axle Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Removing PUR Mount Using Special Tools

Courtesy of BMW OF NORTH AMERICA, INC.

Draw PUR mount (2) in direction of arrow with special tools 33 0 103, 33 0 104, 33 0 105 and 33 0 106 into rear axle carrier (1).

Installation: 

• Observe mounting sequence. 

Mounting sequence 

To avoid damaging the PUR mount (1), draw in the mount in stages.

Fig 3: Turning Special Tool 33 0 103

Courtesy of BMW OF NORTH AMERICA, INC.

Procedure:

• Draw PUR mount (1) 5 mm into rear axle carrier
• Release special tool 33 0 100 DEVICE .
• Turn special tool 33 0 103 in direction of arrow (A) 45°
• Repeat procedure until PUR mount (1) is pressed in up to stop