33 41 Wheel Bearings
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - WHEEL BEARINGS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Drive flange hub to output shaft | E81/E82/E87/E88/E90/Except S65/E91/E92/E93/auβer S65, | M27 | Replace collar nut, lightly oil contact surface | 420 Nm |
| E84/E90/E92/E93/S65 | M27 | Replace collar nut, lightly oil contact surface | 300 Nm | ||
| E81/E82/E87/E88/E90/E91/E92/E93/auβer S65 | M24 | Replace collar nut, lightly oil contact surface | |||
| Jointing torque | 145 Nm | ||||
| Angle of rotation | 90° | ||||
| 2AZ | Wheel bearing to wheel carrier | E84 | M10 | Replace bolts | |
| Jointing torque | 30 Nm | ||||
| Angle of rotation | 110° | ||||