11 36 715 Removing and installing/replacing solenoid valves on left VANOS adjustment unit (S65)

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Disconnect plug connections (2).

Release screw (1).

Remove solenoid valve (3), exhaust adjustment.

Installation:

Replace O-rings.

Fig 1: Identifying Solenoid Valve, Plug Connections And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Unfasten plug connection.

Remove solenoid valve (2), inlet adjustment.

Installation:

Replace O-ring.

Fig 2: Identifying Solenoid Valve And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

Perform VANOS test.