11 22 513 Replacing roller bearing for dual-mass flywheel

WARNING: This page is about a different variant/trim than selected.

NOTE: Flywheel removed!

Position special tool 11 2 010 in roller bearing.

Twist out roller bearing with special tool 11 2 343.

Fig 1: Removing Roller Bearing Using Special Tool (11 2 343)

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble special tools 11 2 350 and 005500 MANDREL .

Drive in roller bearing with special tools 11 2 350 and 005500 MANDREL in direction of arrow as far as it will go.

Fig 2: Driving Roller Bearing Using Special Tools (11 2 350 And 00 5 500)

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.