11 21 571 Replacing grooved ball bearings in crankshaft (S65)

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Remove grooved ball bearing with special tool 11 2 340 in conjunction with special tool 11 2 016.

Fig 1: Removing Grooved Ball Bearing With Special Tool (11 2 340)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace guide bearing.

Drive in guide bearing as far as it will go with special tools 11 2 350 and 005500 MANDREL .

Fig 2: Driving Guide Bearing

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.