13 62 Sensors (S65)
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - SENSORS (S65)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Coolant temperature sensor | S65 | M12x1.5 | 14 Nm | |
| 2AZ Oil pressure switch | S65 | M12x1.5 | 27 Nm | |
| 3AZ Oil condition sensor | S65 | M6 | 1. Initial tightening | 2 Nm |
| 2. Final tightening | 9 Nm | |||
| 4AZ Spacer, el. throttle valve actuator to crankcase | S65 | M6 | Microencapsulation | 8 Nm |
| 5AZ Camshaft sensor to cylinder head cover | S65 | M6x16 AL | 1. Jointing torque | 4 Nm |
| 2. Angle of rotation | 45° |