11 41 Oil Pump with Strainer and Drive
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - OIL PUMP WITH STRAINER AND DRIVE
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Sprocket to oil pump |
S65 |
M10x1 |
Replace nut |
25 Nm |
| 2AZ Oil pump to crankcase |
S65 |
M8 |
|
22 Nm |
| 3AZ Oil return pump to crankcase |
S65 |
M6 |
|
10 Nm |