11 24 Connecting Rods and Bearings
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - CONNECTING RODS AND BEARINGS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Connecting rod bolts | S65 | M9x1 | Replace screws Screws washed and oiled 1. Jointing torque 2. Setting torque 3. Angle of rotation Important 4. Release connecting rod bolts. 5. Jointing torque 6. Setting torque 7. Angle of rotation Important 8. Release connecting rod bolts. 9. Jointing torque 10. Setting torque 11. Angle of rotation |
6 Nm 20 Nm 130° 6 Nm 20 Nm 130° 6 Nm 20 Nm 130° |