11 31 Camshaft
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - CAMSHAFT
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Chain tensioner |
S65 |
M26x1.5 |
Insert screws dry |
65 Nm |
| 2AZ Bearing pin to crankcase and both cylinder heads (sliding rail) |
S65 |
M8 |
|
20 Nm |
| 3AZ Bearing cap of camshafts to cylinder head |
S65 |
M7x1 |
|
13 Nm |