00 00 M8 and M8 x 1 - maximum tightening torques
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - M8 AND M8 X 1 - ACC. TO BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to excerpt from COMPANY STANDARD BMW GS 90003-2 | Surface color/(surface coating) | |||
| M8 thread | yellow (ZN) | M8 8.8 | 24 Nm | |
| silver (ZNS) | M8 8.8 | 19 Nm | ||
| yellow (ZN) | M8 10.9 | 34 Nm | ||
| silver (ZNS) | M8 10.9 | 28 Nm | ||
| yellow (ZN) | M8 12.9 | 40 Nm | ||
| silver (ZNS) | M8 12.9 | 32 Nm | ||
| M8x1 thread | yellow (ZN) | M8 x 1 8.8 |
26 Nm | |
| silver (ZNS) | M8 x 1 8.8 |
21 Nm | ||
| yellow (ZN) | M8 x 1 10.9 |
36 Nm | ||
| silver (ZNS) | M8 x 1 10.9 |
30 Nm | ||
| yellow (ZN) | M8 x 1 12.9 |
44 Nm | ||
| silver (ZNS) | M8 x 1 12.9 |
33 Nm |