00 00 M16 and M16x1.5 - maximum tightening torques
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - M16 AND M16X1.5 - ACC. TO BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to excerpt from COMPANY STANDARD BMW GS 90003-2 | Surface color/(surface coating) | |||
| M16 thread | yellow (ZN) | M16 8.8 | 200 Nm | |
| silver (ZNS) | M16 8.8 | 160 Nm | ||
| yellow (ZN) | M16 10.9 | 280 Nm | ||
| silver (ZNS) | M16 10.9 | 235 Nm | ||
| yellow (ZN) | M16 12.9 | 340 Nm | ||
| silver (ZNS) | M16 12.9 | 260 Nm | ||
| M16x1.5 thread | yellow (ZN) | M16 x 1.5 8.8 |
216 Nm | |
| silver (ZNS) | M16 x 1.5 8.8 |
170 Nm | ||
| yellow (ZN) | M16 x 1.5 10.9 |
303 Nm | ||
| silver (ZNS) | M16 x 1.5 10.9 |
250 Nm | ||
| yellow (ZN) | M16 x 1.5 12.9 |
364 Nm | ||
| silver (ZNS) | M16 x 1.5 12.9 |
275 Nm |