00 00 M14 and M14x1.5 - maximum tightening torques
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - M14 AND M14X1.5 - ACC. TO BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to excerpt from COMPANY STANDARD BMW GS 90003-2 | Surface color/(surface coating) | |||
| M14 thread | yellow (ZN) | M14 8.8 | 130 Nm | |
| silver (ZNS) | M14 8.8 | 104 Nm | ||
| yellow (ZN) | M14 10.9 | 180 Nm | ||
| silver (ZNS) | M14 10.9 | 155 Nm | ||
| yellow (ZN) | M14 12.9 | 220 Nm | ||
| silver (ZNS) | M14 12.9 | 170 Nm | ||
| M14x1.5 thread | yellow (ZN) | M14 x 1.5 8.8 |
143 Nm | |
| silver (ZNS) | M14 x 1.5 8.8 |
110 Nm | ||
| yellow (ZN) | M14 x 1.5 10.9 |
200 Nm | ||
| silver (ZNS) | M14 x 1.5 10.9 |
165 Nm | ||
| yellow (ZN) | M14 x 1.5 12.9 |
240 Nm | ||
| silver (ZNS) | M14 x 1.5 12.9 |
180 Nm |