61 31 996 Carrying out steering angle sensor adjustment
WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
In vehicles with active front steering, steering angle sensor adjustment is integrated in the service function "INITIAL OPERATION/ADJUSTMENT FOR ACTIVE FRONT STEERING
" and must not be carried out separately!
NOTE:
Steering angle sensor adjustment must be carried out:
- Before adjustment work on the front axle/steering
- after all mechanical work on the steering system
- E46 (all-wheel drive), E53, E83: after disconnecting the battery
- after replacement/coding/programming of the following components:
- Fixture for switches of steering column/switch cluster/steering angle sensor
- Dynamic Stability Control (DSC) control unit
- Control unit active anti-roll stabilization (ARS)
Connect vehicle to BMW diagnosis system or Software Service Station.
Select and carry out steering angle sensor adjustment under Service functions.