11 25 Pistons with Rings and Pins N18

WARNING: This page is about a different variant/trim than selected.

PISTONS WITH RINGS AND PINS SPECIFICATION

1st groove
End clearance	mm	0.20... 0.40
End clearance (wear limit)	mm	0.95
Side clearance	mm	0.015... 0.070
2nd groove
End clearance	mm	0.30... 0.55
End clearance (wear limit)	mm	1.06
Side clearance	mm	0.015... 0.060
3rd groove
End clearance	mm	0.10... 0.40
End clearance (wear limit)	mm	0.82
Side clearance	mm	0.040... 0.10