11 12 Cylinder Head with Valve Seat Cover S65
WARNING: This page is about a different variant/trim than selected.
CYLINDER HEAD WITH VALVE SEAT COVER SPECIFICATION
| Valve seat angle | ° | 45 |
| Correction angle: outer | ° | 15 |
| Correction angle: inner | ° | 60 |
| Valve seat width: Inlet | mm | 0.9+0.1 |
| Valve seat width: Exhaust | mm | 1.1+0.1 |
| Valve seat surface: Outside dia. inlet | mm | 34±0.1 |
| Valve seat surface: Outside dia. exhaust | mm | 29.3±0.1 |