SI number

WARNING: This page is about a different variant/trim than selected.

00 01 00 (549)

Consisting of:

1 = 0493778 Basic frame

Fig 1: Identifying Special Tool Cabinet (000220)

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: (basic frame) Basic frame with roller-blind for constructing a separate 2 m long tool cabinet.

NOTE: For an individual order as an attachment frame, the complete delivery specification must already be present under ordering code 00 0 220. Overall length with a mounting frame: 4 m

2 = 0493779 Side wall

NOTE: (side wall) Left side wall. Only required once for constructing the basic frame

3 = 0493780 Side wall

NOTE: (side wall) Right side wall. Only required once for constructing the basic frame

4 = 0493781 Special tool board

NOTE: (large special tool board 2 m x 1 m) This special tool board is used as the rear panel of basic and attachment frames and is the basis for large fixed or movable special tool boards.

5 = 0493782 Roller-blind

NOTE: (roller-blind) Lockable Is included in the 00 0 221 delivery specification. This order number is for reordering purposes only.

6 = 0494126 Frame

NOTE: (side frame) Only required once for constructing the basic frame