Storage Location

WARNING: This page is about a different variant/trim than selected.

Consisting of:

2 = 0492351 Spindle

NOTE: (Spindle) Series: E28 Replaced by 33 4 301 (0 496 535)

8 = 0492357 Nut

NOTE: (Nut with bearing) Series: E28 Replaced by 33 4 302 (0 496 536)

5 = 0492354 Washer

NOTE: (thrust washer) For installing wheel bearing, rear/Series: E28/model: 518, 520i

7 = 0492356 Washer

NOTE: (thrust washer) For installing wheel bearing, rear/Series: E28/model: 525i, 528i

9 = 0492358 Nut

NOTE: (nut)

1 = 0492350 Bell housing

NOTE: For counter support when removing the rear wheel bearing

= 0492352

Fig 1: Identifying Tool (334030)

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: (Tool set) For removing and installing rear wheel bearings Components 33 4 032, 33 4 038 and 33 4 039 are discontinued and are replaced in the order by 33 4 301, 33 4 302 and 33 4 303

Consisting of:

2 = 0492351 Spindle

NOTE: (Spindle) Series: E28 Replaced by 33 4 301 (0 496 535)

8 = 0492357 Nut

NOTE: (Nut with bearing) Series: E28 Replaced by 33 4 302 (0 496 536)

5 = 0492354 Washer

NOTE: (thrust washer) For installing wheel bearing, rear/Series: E28/model: 518, 520i

7 = 0492356 Washer

NOTE: (thrust washer) For installing wheel bearing, rear/Series: E28/model: 525i, 528i

9 = 0492358 Nut

NOTE: (nut)

1 = 0492350 Bell housing

NOTE: For counter support when removing the rear wheel bearing

3 = 0492352 Washer

NOTE: (thrust washer) For removing wheel bearing, rear/Series: E28/model: 518, 528i

4 = 0492353 Sleeve

NOTE: (guide sleeve) For installing wheel bearing, rear/Series: E28/model: 518, 520i

6 = 0492355 Sleeve

NOTE: (guide sleeve) For installing wheel bearing, rear/Series: E28/model: 525i, 528i