LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> M3 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Rear Axle - Special Tools - E90) >> Rear Axle >> 333480 Mandrel >> Mandrel Minimum set: Mechanical tools MW >> Notes

Mandrel Minimum set: Mechanical tools MW: Notes

WARNING: This page is about a different variant/trim than selected.
NOTE: (Drift) For fitting the retainer on the drive shaft (final drive types K and M) and for fitting the circlip in the front axle differential drive flange (E34AWD, E46)