SI number

WARNING: This page is about a different variant/trim than selected.

01 05 90 (207)

Consisting of:

1 = 0492311 Sleeve

NOTE: (Locator sleeve) For removing and installing rubber mount/model series: E31, E36

2 = 0492312 Synchronizing key

NOTE: For removing rubber mount at rear axle final drive cover/model series: E31, E36, E38, E60, E61, E63, E64, E65, E66, E67, RR1

3 = 0492313 Synchronizing key

NOTE: For installing rubber mount at rear axle final drive cover - model series: E31, E36, E38 For removing rubber mount at rear axle final drive cover - model series: E46

6 = 0492316 Synchronizing key

NOTE: For installing rear rubber mount in rear axle support/model series: E31

4 = 0492314 Spindle

NOTE: For removing and installing rubber mount Model series: E31, E36, E38, E46, E60, E61, E63, E64, E65, E66, E67, E85, RR1 Replaced by 33 3 011/0 496 553

5 = 0492315 Nut

Fig 1: Identifying Tool (333310)

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: (Nut with bearing) Series: E31, E36, E38, E46, E60, E61, E63, E64, E65, E66, E67, E85, RR1 Replaced by 33 3 012/0 496 554