LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> M3 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Rear Axle - Special Tools - E90) >> Rear Axle >> 333260 Tool >> Tool Minimum set: Mechanical tools MW >> SI number

SI number

WARNING: This page is about a different variant/trim than selected.

01 05 90 (207)

Consisting of:

3 = 0492290 Sleeve

NOTE: (fitting bush) For extracting the wheel bearing from the wheel carrier - Series: E31, RR1

4 = 0492291 Sleeve

NOTE: (fitting bush) For fitting the wheel bearing into the wheel carrier - Series: E31, E34, E38, E46/16, E52, E53, E83, RR1

7 = 0492294 Washer

NOTE: (thrust washer) For fitting the drive flange - Series: E31, E34, E38, E46/16, E52, E53

2 = 0492289 Sleeve

NOTE: (spacer sleeve) For extracting the wheel bearing from wheel carrier and for fitting the drive flange - Series: E31, E34, E38, E46/16, E52, E53, E83

5 = 0492292 Washer

NOTE: (thrust washer) For fitting the wheel bearing into the wheel carrier - Series: E31

6 = 0492293 Sleeve

NOTE: (fitting bush) For fitting the drive flange and for extracting the wheel bearing - Series: E38, E52, E53, E60, E61, E83, RR1

8 = 0492295 Washer

NOTE: (support disc) for fitting the wheel bearing - Series: E38, E52, E53, E60, E61, E83, RR1

1 = 0492288 Spindle

NOTE: (Spindle with 2 nuts) Series: E31, E34, E38, E46/16, E52, E53, E60, E61, E83, RR1 Replaced by 33 4 300/0 496 534