Storage Location

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Extractor (331300)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

2 = 0492098 Washer

NOTE: (Disc) Replaced by 33 1 311.(0 492 107)

3 = 0492099 Washer

NOTE: (Disc) Replaced by 33 1 311.(0 492 107)

4 = 0492100 Washer

NOTE: (Disc) Replaced by 33 1 311.(0 492 107)

1 = 0492097 Connector

NOTE: (basic body) For transmission S5D 260Z, S5D 310Z and S5D 320Z;

5 = 0492101 Synchronizing key

NOTE: (Synchronizing key (old))

6 = 0492102 Synchronizing key

= 0492103

7 = 0492103 Synchronizing key

8 = 0492104 Synchronizing key

9 = 0492105 Synchronizing key

NOTE: For rear axle final drive and for installation of the camshaft sprocket on the crankshaft (M70)

1 = 0492107 Washer

NOTE: (washer)

2 = 0492108 Synchronizing key

NOTE: For pulling the bearing inner race off the drive flange - Series: E36/5