54 12 115 Removing and installing glass slide/tilt sunroof lid

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Release left and right screws (1).

Lift glass slide/tilt sunroof lid upwards to remove.

Installation:

Replace screws and insert with Loctite.

Adjust glass slide/tilt sunroof lid.

Tightening torque 54 12 01AZ .

Initialize glass slide/tilt sunroof.

Fig 1: Identifying Screws And Glass Slide/Tilt Sunroof Lid

Courtesy of BMW OF NORTH AMERICA, INC.