11 21 571 Replacing grooved ball bearings in crankshaft (S65)

Special tools required: 

• 00 5 500 
• 11 2 016 
• 11 2 340 
• 11 2 350 

See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

See ENGINE - SPECIAL TOOLS .

Necessary preliminary tasks: 

• Remove clutch.  See 21 21 500 REMOVING AND INSTALLING/REPLACING CLUTCH (GS6-53BZ) S65 .

Remove grooved ball bearing with special tool 11 2 340  in conjunction with special tool 11 2 016  .

Installation: 

Replace guide bearing.

Drive in guide bearing as far as it will go with special tools 11 2 350  and 00 5 500  .

Assemble engine.