51 16 000 Removing and installing/replacing mirror on left or right front door
Necessary preliminary tasks:
- Remove front door trim panel
- Lever out cover on door window frame at front
IMPORTANT:
Secure door mirror against falling down.
Disconnect plug connection (1).
Release screws (2).
Tightening torque 51 16 1AZ , see 51 16 MIRRORS, FINISHERS, ASHTRAYS, CONSOLES .
Replacement:
Due to the thread-tapping screws, the tightening torque of the new mirror is increased by 2 Nm.
Tightening torque 51 16 1AZ , see 51 16 MIRRORS, FINISHERS, ASHTRAYS, CONSOLES .
Remove mirror (1) outwards.
Installation:
Check function.
Installation:
Acoustic insulation (1) must not be damaged.