51 41 241 Removing and installing/replacing cover for armrest on driver door
Special tools required:
- 00 9 317
See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .
Necessary preliminary tasks:
- Remove rocker switch for side window operation . See 61 31 115 REPLACING ROCKER SWITCH FOR SIDE WINDOW OPERATION (FRONT) .
- Remove front door trim panel
Release lock washers (1) on back of door trim panel (2).
Installation:
Studs for lock washers (1) must not be damaged.
If necessary, replace faulty lock washers (1).
Unclip trim (1) with special tool 00 9 317 in upward direction from retainers (2).
Installation:
If necessary, replace faulty retainers (2).
Installation:
Catches (1) on trim (2) must not be damaged.