51 32 154 Adjusting left or right front door window glass: Notes
Special tools required:
- 51 0 320
- 51 0 341
- 51 0 342
- 51 3 010
- 51 3 080
- 51 3 300
- 51 3 301
- 51 3 303
- 51 3 304
- 51 3 310
See BODY EQUIPMENT - SPECIAL TOOLS (CONVERTIBLE/COUPE) or BODY EQUIPMENT - SPECIAL TOOLS (SEDAN) .
Prerequisite:
- Vehicle must be standing on its wheels on a level floor
- Front door correctly adjusted to fit
- If necessary, close retractable hardtop
IMPORTANT:
When closing, the door window glass must not jam on the trim strip in any area of the window (window glass breakage).
If necessary, incoming check:
The following incoming check must be carried out prior to every adjustment operation:
NOTE:
Incoming check must be carried out with the window cavity cover strip fitted.
- Denormalize power window
- Measure retraction depths with special tool 51 3 080
- Insert special tool 51 0 341 in rotary striker and close rotary striker
- Measure pretension with special tool 51 0 342
- Initialize power windows
Necessary preliminary tasks:
- Denormalize power window
- Remove outer window cavity cover strip (not for checking pretension)