64 11 377 Removing and installing/replacing heater/air conditioner operator unit (version without CCC/ASK)

Special tools required:

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection) ! See 61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

NOTE: Car Communication Computer (CCC)
Audio System Kontroller / Controller (ASK)

Lever out heater/air conditioner operator unit (1) with special tool 00 9 340 and pull.

Disconnect associated plug connections.

Remove heater/air conditioner operator unit (1) complete with center console switch cluster (2) and trim (3).

Fig 1: Removing Heater And Air Conditioner Operator Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carefully unclip operator unit trim (1) at inner retaining points (2) only.

IMPORTANT: Risk of damage to operator unit (3)!

Fig 2: Identifying Operator Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully unclip operator unit trim (1) at outer retaining points (2) only.

Remove trim (1) from operator unit (3).

Fig 3: Identifying Trim And Operator Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out programming/coding using scan tool.