72 14... Removing and installing/replacing Top Tether eyelets for child seat

WARNING: This page is about a different variant/trim than selected.

NOTE: Two or three Top Tether eyelets are installed, depending on the model.

Lever out covers (1) and release screws underneath.

Remove Top Tether eyelets (2).

Tightening torque 52 24 03AZ .

Fig 1: Identifying Covers With Top Tether Eyelets

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Ensure Top Tether eyelets (1) are in correct installation position.
It must be possible for Top Tether eyelets (1) to be tilted in the direction of head restraints (2).

Fig 2: Identifying Top Tether Eyelets With Head Restraints

Courtesy of BMW OF NORTH AMERICA, INC.