86 10... Disassembly of left and right lamp housings

WARNING: This page is about a different variant/trim than selected.

Cut through sealing compound (1) and remove.

Drill out rivet connections (2).

Installation

Use Sikaflex 221 as sealing compound.

Fig 1: Identifying Lamp Housing Sealing Compound And Rivets Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Drill out rivet connections (1).

Raise side sections (2, 3).

Pull out lamp housing (4) towards inside in direction of platform.

Fig 2: Identifying Lamp Housing And Rivets Connections

Courtesy of BMW OF NORTH AMERICA, INC.