86 10... Disassembly of front protection bar

Release screws (1) on cross-member (2).

Installation: 

Use new self-locking nuts.

Tightening Torque,

Refer to TIGHTENING TORQUE 86 10 4AZ.

Installation 

Tightening Torque,

Refer to TIGHTENING TORQUE 86 10 5AZ.

Fig 1: Identifying Front Protection Bar Cross Member With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on longitudinal member (2).

Installation 

Tightening Torque,

Refer to TIGHTENING TORQUE 86 10 5AZ.

Fig 2: Identifying Front Protection Bar Longitudinal Member With Screws

Courtesy of BMW OF NORTH AMERICA, INC.