86 21... Removing plug for inside light

WARNING: This page is about a different variant/trim than selected.

NOTE: Two different types of plugs are used for the inside light. Both types function in the same way, only their designs are different.

Type 1:

Release screw (1) and separate housing plug (2).

Fig 1: Identifying Plug With Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and disconnect cables (2) from screw clamp.

Fig 2: Identifying Cables And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Type 2:

Release screw (1) and separate housing plug (2).

Fig 3: Identifying Plug And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Remove contact parts (1+2).

Installation

When installing, make sure contact parts (1+2) are in correct installation position.

Fig 4: Identifying Contact Parts

Courtesy of BMW OF NORTH AMERICA, INC.