51 45 263 Removing and installing/replacing instrument panel trim on right

Carefully release trim (1) with special tool 00 9 321 from retainers (3) and lock pins (2).

Fig 1: Removing Trim From Retainers And Lock Pins Using Special Tool (00 9 321)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Clips (Hutfix) (1) must be seated in associated mountings.

Replace clips (Hutfix) (1) if they were released during removal.

1. Turn clip (Hutfix) (1) with screwdriver to left by approx. 90°
2. Lever out clip (Hutfix) (1) from below

Fig 2: Removing Clips Remaining On Decorative Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Lock pins (1) and retainers (3) on trim (2) must not be damaged.

If necessary, replace lock pins (1) and retainers (3).

Fig 3: Identifying Pins And Retainers On Trim

Courtesy of BMW OF NORTH AMERICA, INC.