51 47 065 Removing and installing/replacing finishing strip at front left or right entrance

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Risk of damage!
Do not raise finishing strip (2) over entire length simultaneously.

Unclip clips (1) for finishing strip (2) with special tool 00 9 317 .

Remove finishing strip (2).

Fig 1: Removing Finishing Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace faulty clips (1).

Fig 2: Identifying Finishing Strip Clips

Courtesy of BMW OF NORTH AMERICA, INC.