61 31 131 Removing and installing/replacing left or right shift paddle for transmission (twin clutch transmission) (M3)

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks

Disconnect plug connection (1).

Release screw (3).

Feed out wiring harness (2) and remove shift paddle for transmission (5) in direction of arrow from steering wheel (4).

Fig 1: Removing Wiring Harness

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure shift paddle

for transmission (5) is correctly seated on steering wheel (4)

Make sure wiring harness (2) is laid correctly.