51 47 030 Removing and installing/replacing rear (inside) left or right entrance cover strip

Special tools required: 

• 00 9 317 

See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

Necessary preliminary tasks: 

• Remove rear seat  . See SEATS - REPAIR .

Release expansion rivet (1).

Unclip clips (2) on entrance cover strip (3) with special tool 00 9 317  .

Remove entrance cover strip (3) towards top.

Installation: 

If necessary, replace faulty clips (1).

Fit entrance cover strip (2) with preinstalled clips (1).