51 34 171 Replacing rear left or right door window
Necessary preliminary tasks:
- Remove sound insulation in rear door .
- Remove inner window cavity cover strip .
- Remove trim on rear door window frame .
Open door window glass (1) down to distance (A)
A = approx. 120 mm
IMPORTANT:
Disconnect plug connection (1) from power window motor (2) (risk of trapping).
Lever out catches (3) with screwdriver (4) in direction of arrow.
Installation:
Catch (3) must be correctly clipped into place.
Carry out function check on power window unit and antitrapping protection.
If necessary, normalize power window unit.
Installation:
Following parts of window guide (3) must not be damaged or missing:
- Catch
- Buffer stop
Remove door window glass (1) towards top.
Installation:
Door window glass does not need to be adjusted.