66 20 565 Removing and installing/replacing front signal sensor (Park Distance Control)

Necessary preliminary tasks: 

• Remove trim panel for pedal assembly  . See 51 45 185 REMOVING AND INSTALLING/REPLACING PANEL FOR PEDALS .

Disconnect plug connection (1).

Fig 1: Identifying Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip signal sensor on both sides from fixture (1).

Installation: 

Signal sensor (2) must snap audibly into retaining tabs.

Fig 2: Identifying Signal Sensor On Both Sides From Fixture

Courtesy of BMW OF NORTH AMERICA, INC.