33 11 Rear Differential Case with Cover

REAR DIFFERENTIAL CASE WITH COVER - TIGHTENING TORQUES SPECIFICATION

		Type	Thread	Tightening specification	Measure
1AZ	Case Covers Transmission allocation	E36, E38, E39, E46, E53, E60, E61, E65, E66, E83, E85, E86	M10 8.8	168N 168K 188 188N 188K 210 210N 215	45 Nm
		E46, E83, E85	M10 10.9	168K	55 Nm
		E38, E39, E46, E53, E60, E61, E65, E66, E83, E85	M10 10.9	188K	55 Nm
		E46, E53, E60, E61, E63, E64, E65, E66, E67, E83	M10	215K	90 Nm
		E38, E39, E52	M10x25 10.9	220K	90 Nm
		E38, E39, E52	M10x75 10.9	220K	110 Nm
		E38, E39, E52	M10x67 10.9	220K	130 Nm
		E65, E66, E67	M10	230K	90 Nm
		E85	M10 10.9	168L	55 Nm
		E60, E61, E63, E64	M10 10.9	188L 188LW	55 Nm
		E65, E66, E83, E85, E86	M10 10.9	188L	55 Nm
		E60, E63, E64	M10 10.9	215 with lock	60 Nm
2AZ	Side bearing cap (insert into through bore-holes only new coated screws or screws with Loctite 270)	E12, E21, E23, E24, E28, E30, E31, E32, E34, E36, E38	M8	Type M, G	22 Nm
		E12, E21, E28, E30, E34, E36, E38, E39	M8	Type K
				Jointing torque	10 Nm
				Torque angle	40 °
3AZ	Oil fill and drain plug with sealing ring	E30, E31, E32, E34, E36, E38, E39, E46, E52, E53, E60, E63, E83, E85, E86		Replace sealing ring	65 Nm
4AZ	Drive flange, right	E34 / 525ix	M10		59 Nm
5AZ	Drive flange, left (always replace screws)	E34 / 525ix	M14 x 1.5	Jointing torque	90 Nm
				Torque angle	100 + 4 °
6AZ	Oil cooler connection to rear differential	E31			35 Nm
7AZ	Union nuts pipe oil cooler	E31			17 Nm
8AZ	Vibration damper on bracket	E38, E39, E46			77 Nm
9AZ	Oil filler and oil drain plugs with O-ring on cover / housing	E30, E31, E32, E34, E36, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E86		Replace oil filler and oil drain plugs	60 Nm