65 83 010 Removing and Installing/Replacing Car Communication Computer
IMPORTANT:
Read and comply with notes on protection against electrostatic damage (ESD protection).
See 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE)
Necessary preliminary tasks:
- Remove luggage compartment floor trim . See 51 47 101 REMOVING AND INSTALLING/REPLACING LUGGAGE COMPARTMENT FLOOR TRIM PANEL
- Disconnect battery negative lead . See 12 00... INSTRUCTIONS FOR DISCONNECTING AND CONNECTING BATTERY
- Remove middle trim for instrument panel . See 51 45 310 REMOVING AND INSTALLING (REPLACING) CENTER TRIM FOR INSTRUMENT PANEL
NOTE:
Comply with notes and instructions on handling optical waveguides.
See 61 00... NOTES ON HANDLING OPTICAL FIBERS
IMPORTANT:
Do not scratch decorative trims (1), cover if necessary.
Release screws (2).
Pull back Car Communication Computer (3) slightly.
Unlock associated plug connections and disconnect.
Remove Car Communication Computer (3).
Replacement:
Carry out programming/coding using BMW scan tool.