65 13 188 Removing and Installing/Replacing Rear Mid-Range Speaker (In Rear Shelf)

Special tools required:

Lever speaker cover (1) with special tool 00 9 341 out of rear shelf (2).

Fig 1: Identifying Special Tool (00 9 341)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Locks (1) of speaker cover (2) must not be damaged.

Make sure speaker cover (2) is fully engaged.

Fig 2: Identifying Locks Of Speaker Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove mid-range speaker (2) upwards from rear shelf (3).

Disconnect associated plug connection and remove mid - range speaker (2).

Fig 3: Identifying Mid-Range Speaker & Screws

Courtesy of BMW OF NORTH AMERICA, INC.