LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 905 (General Electrical System - Repair Instructions) >> Switch >> 61 31 084 Removing and installing/replacing switch for automatic rear lid actuation

61 31 084 Removing and installing/replacing switch for automatic rear lid actuation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

Lever switch for automatic rear lid actuation (1) with special tool 64 1 020 sideways out of frame (2).

Fig 1: Removing Switch For Automatic Rear Lid Actuation
G03290811Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection behind and remove switch for automatic rear lid actuation (1).