LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 905 (General Electrical System - Repair Instructions) >> ECUs, Modules >> 61 35 950 Removing and installing (replacing) control unit for comfort access system

61 35 950 Removing and installing (replacing) control unit for comfort access system

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Unlock plug connection (1) and disconnect.

Fig 1: Unlocking Plug Connection
G03290892Courtesy of BMW OF NORTH AMERICA, INC.

Open catches (2) in direction of arrow and remove control unit for comfort access system (3) towards top.

Replacement:

Carry out coding/programming.

Observe following IDC specifications:

Fig 2: View Of Control Unit
G03290893Courtesy of BMW OF NORTH AMERICA, INC.