LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 902 (Body Equipment - Repair Instructions) >> Trunk Latch Locks >> 51 24 391 Replacing rubber mount on trunk lid support

51 24 391 Replacing rubber mount on trunk lid support

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.

Screw off both rubber buffers (1).

Fig 1: Removing Rubber Buffers
G03291475Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Adjust both rubber buffers (1) (work is described in "Adjusting rear lid lock"). Refer to 51 24 004 ADJUSTING REAR LID LOCK (LOWER SECTION OF REAR LID LOCK) .