51 31... Removing windscreen with "Roll Out 2000": Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 51 3 270
NOTE:
Using the "Roll Out 2000" system (sourcing reference: BMW Workshop Equipment and Planning Documentation) minimizes paintwork and ergonomic damage as well as damage that is hazardous to health.
WARNING:
Follow safety instructions for working on cars with AIRBAG systems (risk of injury).
IMPORTANT:
Take care when handling sharp-edged tools and cutting wire (risk of damage to head AIRBAG).
IMPORTANT:
Always keep both suckers dry and clean to ensure their optimum adhesion on the windscreen.
Lubricate coil if interlock rattling becomes too loud.
Always wear protective goggles and gloves for your own safety.
Lubricate coil if interlock rattling becomes too loud.
Always wear protective goggles and gloves for your own safety.