51 31... Instructions on gluing windscreen: General:

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.

The windscreen and rear window (also the rear side windows if necessary) are bonded to the body. This gluing will increase the torsional strength of the vehicle. To obtain perfect bonding, comply with the installation procedure described in the following.

It is possible to tow or drive without windscreen or rear window.

The windscreen must be secured with yellow plastic adhesive tape (sourcing reference: BMW Parts Service) after being installed. The paint must be completely hardened after painting work.

Set down window glass and process on BMW-approved X-universal stand.
In winter, the vehicles must stand in a room with a temperature of at least 15 °C.