LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 902 (Body Equipment - Repair Instructions) >> Front And Rear Window >> 51 31... Instructions on gluing windscreen >> Effect Of Differing Adhesive Quantities:

Effect Of Differing Adhesive Quantities:

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.
ADHESIVE REFERENCE CHART

Too little adhesive: Too much adhesive:
  • Windscreen rests too low in body cutout
  • Strains/tensions may occur (windscreen breakage)
  • Insufficient squeezing of adhesive bead (leaking)
  • Windscreen rests too high in body cutout
  • Wind noise may occur
  • Strains/tensions may occur (windscreen breakage)
  • Fouling of add-on parts by emerging adhesive
  • Adhesive on uninsulated strainer pressure lines of antenna(s) (interference of reception)