LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 896 (Cooling System - Repair Instructions) >> Engine Radiator With Attachment >> 17 11 000 Removing and installing radiator (N62)

17 11 000 Removing and installing radiator (N62)

WARNING: This page is about a different car, the 2005 BMW 745i, 2004 BMW 745i, 2003 BMW 745i, and 2002 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Danger of scalding!
Only perform this work after engine has cooled down.

Follow instructions for working on cooling system. Refer to 17 00... INSTRUCTIONS FOR WORKING ON COOLING SYSTEM .

Remove fan cowl. Refer to 17 11 031 Replacing fan cowl (N62) .

Remove front underbody protection.

Drain coolant. Refer to 17 00 005 Draining and adding coolant (N62) .

Detach heat exchanger for automatic transmission from radiator. Refer to 17 22 010 Removing and installing/replacing heat exchanger for automatic transmission (N62) .

Unlock and detach all coolant hoses on radiator.

Remove radiator (1) towards top.

Fig 1: Removing Radiator
G03289944Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Ensure correct seating in side guides.

Top up coolant. Refer to 17 00 005 Draining and adding coolant (N62) ..

Vent cooling system and check for leaks. Refer to 17 00 039 Venting cooling system and checking for leaks (N62) .