13 71 025 Removing and installing raw air housing (N62)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.

Remove air cleaner element. Refer to 13 72 001 Replacing air cleaner element (N62) .

Release retaining screws on coolant expansion tank.

Remove suction filter housing. Refer to 13 71 000 Removing and installing intake filter housing (N62) .

Press catches (2) together and pull out intake duct (3).

Fig 1: Pulling Out Intake Duct

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten screws.

Fig 2: Removing Raw Air Housing

Courtesy of BMW OF NORTH AMERICA, INC.

Remove raw air housing (4).